Dre Dev Tools
Tools › Coatings
Free coatings tool

Garage floor epoxy calculator

How many gallons and kits a one, two or three car garage needs, by coating system, thickness and solids.

Quick answer: with a 100 % solids epoxy at 10 mils and 10 % waste, a one-car garage (240 sq ft) takes about 1.6 gallons, a two-car (440 sq ft) about 3.0 and a three-car (650 sq ft) about 4.5. Thin water-based coats need far less per coat. Measure your floor: garages vary.

Material for one coat
–
In litres–
Spread rate–
Kits to order–

One coat of one product. Size each layer of the system the same way, from its own data sheet.

Garage charts and three worked examples

Gallons for one coat, with 10 % waste

Garage (example size)Water-based epoxy, 3 mils100% solids epoxy, 10 milsPolyurea basecoat, 7 milsPolyaspartic topcoat, 8 milsMoisture-vapor primer, 12 mils
1-car · 240 sq ft1.0 gal1.6 gal1.2 gal1.5 gal2.0 gal
2-car · 440 sq ft1.8 gal3.0 gal2.1 gal2.8 gal3.6 gal
3-car · 650 sq ft2.7 gal4.5 gal3.2 gal4.1 gal5.3 gal

Gallons = area × mils ÷ (1,604 × solids by volume) × 1.10. The garage sizes are the presets in CoatCalc, not a standard: measure your own floor.

Coverage per gallon by system type

SystemSolids by volumeTypical thicknessCoverage per gallonPublished data behind it
Water-based epoxy50 %3 mils267 sq ftWater-based sealers and primers: about 50–60 % solids in 3–5 mil coats
100% solids epoxy100 %10 mils160 sq ftEcocrete 160 sq ft/gal at 10 mils; Polytitan 150 at 10 mils; Benjamin Moore HP4300 100–150 at 10–15 mils
Polyurea basecoat99 %7 mils227 sq ftFloorguard 170–200 sq ft/gal at 8–9 mils; UDT Polyurea 1 230–320 at 5–7 mils; Simiron 200–267 at 6–8 mils
Polyaspartic topcoat87 %8 mils174 sq ftPE-XXX 150–200 sq ft/gal over chip; Poly 85 175–225 over flake; Deco-Crete Polyaspartic 90 150–260
Moisture-vapor primer100 %12 mils134 sq ftMoisture-vapor epoxy primers: 100 % solids at 12–16 mils

Source: coverage = 1,604 sq ft per gallon at 1 mil × solids ÷ mils (Neogard, "Theoretical vs. actual coverage rates", checked 12 November 2026); solids and thickness are mid-range values from the makers' data sheets named in the last column. Checked October 2026. Always use the numbers on your own product's technical data sheet.

Worked example: a one-car garage, 240 sq ft, two thin coats of water-based epoxy

  1. One coat at 50 % solids and 3 mils: 240 × 3 ÷ (1,604 × 0.50) = 0.90 gal, plus 10 % = 0.99 gal.
  2. Two coats: 2 × 0.99 = 1.98 gal. In 1-gallon kits: 2.
  3. Dry film left on the floor: 2 × 3 = 6 mils, against 10 mils from one coat of 100 % solids epoxy.

Result: about 2.0 gal for two coats, 2 kits of 1 gal.

Worked example: a two-car garage, 440 sq ft, flake system

  1. Base coat, 100 % solids epoxy at 10 mils: 440 × 10 ÷ 1,604 = 2.74 gal, plus 10 % = 3.02 gal. In 3-gallon kits: 2 kits.
  2. Topcoat, polyaspartic at 87 % solids and 8 mils: 440 × 8 ÷ (1,604 × 0.87) × 1.10 = 2.77 gal. In 2-gallon kits: 2.
  3. Flake, primer and a second topcoat are sized the same way, each from its own data sheet.

Result: about 3.0 gal of epoxy base and 2.8 gal of polyaspartic topcoat.

Worked example: a three-car garage, 650 sq ft, polyurea base and polyaspartic topcoat

  1. Base coat, polyurea at 99 % solids and 7 mils: 650 × 7 ÷ (1,604 × 0.99) × 1.10 = 3.15 gal. In 2-gallon kits: 2.
  2. Topcoat, polyaspartic at 87 % solids and 8 mils: 650 × 8 ÷ (1,604 × 0.87) × 1.10 = 4.10 gal. In 2-gallon kits: 3.
  3. Kits round up: 2 kits of base hold 4 gal for the 3.2 gal needed.

Result: about 3.2 gal of polyurea base and 4.1 gal of polyaspartic topcoat.

More coating tools

The whole job, on your phone

CoatCalc: Epoxy Floor Coating

Flake, crack filler, cove base, dew point and pot life, then a PDF quote with your client price in one tap. See what's inside.

Questions

How much epoxy do I need for a 2 car garage?

For 440 sq ft with a 100 % solids epoxy at 10 mils and 10 % waste: 3.0 gallons for the base coat. A 500 sq ft floor takes 3.4 gallons the same way.

How much epoxy for a 1 car garage?

About 1.6 gallons of 100 % solids epoxy at 10 mils for 240 sq ft, with 10 % waste.

How much epoxy for a 3 car garage?

About 4.5 gallons of 100 % solids epoxy at 10 mils for 650 sq ft, with 10 % waste. In 3-gallon kits that is 2 kits.

How many square feet does a gallon of epoxy cover?

1,604 sq ft at 1 mil, times the solids by volume, divided by the dry thickness in mils. A 100 % solids epoxy at 10 mils covers about 160 sq ft; a 50 % solids water-based epoxy at 3 mils covers about 267 sq ft, but leaves a much thinner film.

Why does a water-based kit cover more than a 100 % solids kit?

Because it goes on thinner and half of it evaporates. Coverage alone does not compare products: compare the dry film thickness you end up with.