Dre Dev Tools
Tools › Electrical
Free electrical tools

Electrical calculators and charts

Voltage drop, wire size and ampacity for NEC work, with the formulas, tables and worked examples behind every number.

Calculator

Voltage drop calculator

AWG or mm², copper or aluminum, single phase, three phase and DC.

Calculator

Wire size calculator

Conductor and breaker by NEC Table 310.16, with a voltage drop check.

Calculator

AWG to mm² converter

AWG and kcmil to mm² and back.

Chart

Ampacity chart (NEC 310.16)

Copper and aluminum, 60/75/90 °C, with correction factors.

Chart

Wire size by amps and distance

15 to 100 A over 25 to 300 ft at 120 V and 240 V.

Chart

12 AWG voltage drop per foot

Millivolts per amp per foot and maximum run length.

Guide

Three-phase voltage drop

The 1.732 formula with a chart for 208, 240 and 480 V.

Chart

12 V DC voltage drop

Wire size for 3 % and 10 % drop on low-voltage DC runs.

Chart

Wire size for a 50 amp sub panel

50, 60 and 100 A feeders, copper and aluminum, 25 to 250 ft.

Chart

EV charger wire size

32 to 80 A chargers: breaker and copper wire by run length.

Chart

Conduit fill chart

THHN in EMT and PVC Schedule 40, 1/2 to 2 in., at 40 % fill.

Guide

How many 12 AWG wires in 3/4 EMT

The fill count, and what derating leaves of it.

Guide

Box fill (NEC 314.16)

Volume per conductor, what counts and two worked examples.

Reference

NEC edition by state

The edition each state enforces, its effective date and what is pending.

The whole job, on your phone

Electrician Calc: Wire & Panel

Wire size with derating, panel planner, motors, solar and 21 calculators with step-by-step working and PDF reports. See what's inside.

Reference only. The code edition and amendments adopted where you work, the equipment's listing and the manufacturer's instructions govern. Have a licensed electrician check the installation.