Dre Dev Tools
Tools › Roofing
Free roofing tool

Roof pitch multiplier chart

Slope factors for every pitch from 1/12 to 12/12, and a calculator that turns a footprint into roof area, squares and bundles.

Quick answer: multiply the footprint by the slope factor: 1.054 for 4/12, 1.118 for 6/12, 1.202 for 8/12, 1.302 for 10/12 and 1.414 for 12/12. A 2,000 sq ft footprint at 6/12 is 2,236 sq ft of roof, or 22.4 squares.

Roof size
–
Roof area–
Footprint–
Slope factor–
Shingles, 3 bundles per square, with waste–

Area of a roof whose planes share one pitch = footprint (with overhangs) × slope factor. Check the bundle wrapper: coverage per bundle differs between products.

Pitch charts and worked example

Roof pitch multiplier chart, 1/12 to 12/12

PitchAngleSlope factor (area, rafter)Hip / valley factorGrade
1/124.8°1.0031.4178 %
2/129.5°1.0141.42417 %
3/1214.0°1.0311.43625 %
4/1218.4°1.0541.45333 %
5/1222.6°1.0831.47442 %
6/1226.6°1.1181.50050 %
7/1230.3°1.1581.53058 %
8/1233.7°1.2021.56367 %
9/1236.9°1.2501.60175 %
10/1239.8°1.3021.64183 %
11/1242.5°1.3571.68592 %
12/1245.0°1.4141.732100 %

Exact geometry: slope factor = √(12² + rise²) ÷ 12, hip and valley factor = √(2 × 12² + rise²) ÷ 12, angle = atan(rise ÷ 12). The same factors are in the RoofCalc app.

Roof area by footprint and pitch

Pitch1,000 sq ft footprint1,500 sq ft footprint2,000 sq ft footprint2,500 sq ft footprint3,000 sq ft footprint
3/121,031 sq ft1,546 sq ft2,062 sq ft2,577 sq ft3,092 sq ft
4/121,054 sq ft1,581 sq ft2,108 sq ft2,635 sq ft3,162 sq ft
5/121,083 sq ft1,625 sq ft2,167 sq ft2,708 sq ft3,250 sq ft
6/121,118 sq ft1,677 sq ft2,236 sq ft2,795 sq ft3,354 sq ft
7/121,158 sq ft1,737 sq ft2,315 sq ft2,894 sq ft3,473 sq ft
8/121,202 sq ft1,803 sq ft2,404 sq ft3,005 sq ft3,606 sq ft
9/121,250 sq ft1,875 sq ft2,500 sq ft3,125 sq ft3,750 sq ft
10/121,302 sq ft1,953 sq ft2,603 sq ft3,254 sq ft3,905 sq ft
12/121,414 sq ft2,121 sq ft2,828 sq ft3,536 sq ft4,243 sq ft

Footprint is the area under the roof seen from above, overhangs included. Divide by 100 for squares.

Worked example: a 50 × 40 ft footprint at 6/12

  1. Footprint with overhangs: 50 × 40 = 2,000 sq ft.
  2. Slope factor for 6/12: √(144 + 36) ÷ 12 = 1.118. Roof area: 2,000 × 1.118 = 2,236 sq ft.
  3. Squares: 2,236 ÷ 100 = 22.4. With 10 % waste at 3 bundles per square: 74 bundles.
  4. A hip on the same roof runs 1.5 ft for every foot of run, so a hip over a 20 ft run is 30 ft long.

Result: 2,236 sq ft of roof, 22.4 squares, 74 bundles of shingles.

More roofing tools

The whole job, on your phone

RoofCalc: Roofing Calculator

Measure from the ground, get the squares and every material, and send a PDF quote before you leave the driveway. See what's inside.

Questions

What is the roof pitch multiplier for a 6/12 roof?

1.118. Multiply the footprint area or the horizontal run by it to get the sloped area or the rafter length. The angle is 26.6°.

How do I calculate a roof pitch multiplier?

Slope factor = √(12² + rise²) ÷ 12. For 8/12: √(144 + 64) ÷ 12 = 1.202.

What is the hip and valley factor?

The length of a hip or valley per foot of common run when both planes have the same pitch: √(288 + rise²) ÷ 12. For 6/12 it is 1.500, for 12/12 1.732.

Does the multiplier work for hip roofs?

Yes, for the area. As long as every plane has the same pitch, roof area = footprint × slope factor, whether the roof is a gable or a hip. Hips and cut-up roofs need more waste for the cuts.

How do I measure the pitch?

Hold a level horizontally against the roof or a rafter, mark 12 in along it and measure straight down to the roof. That drop in inches is the rise per 12.