How much chlorine to add to a pool
The amount of liquid chlorine, bleach, cal-hypo, dichlor or trichlor that raises free chlorine by the ppm you need, for your pool's volume.
Quick answer: to raise free chlorine by 1 ppm in 10,000 US gallons, add about 12.8 fl oz of 10 % liquid chlorine, 2.1 oz of 65 % cal-hypo or 1.5 oz of 90 % trichlor. Scale by your pool's gallons and the ppm you need, and follow the product label.
An estimate from the label strength. Add in portions and retest. Never mix chlorine products with each other or with acid.
Before you add chlorine
- The product label comes first. Read it and follow its directions and dose limits, even where this page says something different.
- Never mix pool chemicals with each other, and never mix different kinds of chlorine. Mixing can release toxic gas or start a fire. Use a clean, dry scoop for each product.
- Wear goggles and gloves, work outdoors or with good ventilation, and keep children and pets away.
- Add one chemical at a time to the pool water with the pump running. Never add water to a chemical.
- Store chemicals in their original labelled containers, dry, closed and apart from each other.
- Add in portions, let the water circulate, test again, and wait until the chlorine is back in its normal range before anyone swims.
More on storing and handling pool chemicals: CDC, pool chemical safety (read 12 November 2026). If someone breathes fumes or gets chemical in the eyes, call emergency services or poison control.
Chlorine charts and worked example
Chlorine to raise free chlorine by 1 ppm in 10,000 US gallons
| Product (label strength) | Amount | Each 1 ppm also adds |
|---|---|---|
| Liquid chlorine 10 % | 12.8 fl oz | salt only |
| Liquid chlorine 12.5 % | 10.2 fl oz | salt only |
| Bleach 6 % | 20.8 fl oz | salt only |
| Bleach 8.25 % | 14.8 fl oz | salt only |
| Cal-hypo 65 % | 2.1 oz | +0.7 ppm calcium hardness |
| Cal-hypo 73 % | 1.8 oz | +0.7 ppm calcium hardness |
| Dichlor 56 % | 2.4 oz | +0.9 ppm stabilizer (CYA) |
| Trichlor 90 % | 1.5 oz | +0.6 ppm stabilizer (CYA) |
Source: stoichiometry: ppm × litres = milligrams of chlorine, divided by the product's label strength; the same maths as PoolPro, which agrees with Trouble Free Pool's Pool Math within about 1 % (10 % liquid chlorine: 12.8 fl oz). Checked 25 October 2026. Strengths are common label values: use the one printed on your product.
Chlorine for a 1 ppm rise by pool size
| Pool volume | Liquid chlorine 10 % | Liquid chlorine 12.5 % | Cal-hypo 65 % | Trichlor 90 % |
|---|---|---|---|---|
| 5,000 gal | 6.4 fl oz | 5.1 fl oz | 1.0 oz | 0.7 oz |
| 7,500 gal | 9.6 fl oz | 7.7 fl oz | 1.5 oz | 1.1 oz |
| 10,000 gal | 12.8 fl oz | 10.2 fl oz | 2.1 oz | 1.5 oz |
| 15,000 gal | 19.2 fl oz | 15.4 fl oz | 3.1 oz | 2.2 oz |
| 20,000 gal | 25.6 fl oz | 20.5 fl oz | 4.1 oz | 3.0 oz |
| 25,000 gal | 32.0 fl oz | 25.6 fl oz | 5.1 oz | 3.7 oz |
| 30,000 gal | 38.4 fl oz | 30.7 fl oz | 6.2 oz | 4.5 oz |
| 40,000 gal | 51.2 fl oz | 41.0 fl oz | 8.2 oz | 5.9 oz |
Tap a volume to load it into the calculator, then pick your product and the rise you need there: 3 ppm takes three times as much. Trichlor dissolves slowly (tablets in a feeder or floater), so it is not a way to raise chlorine quickly.
Free chlorine one container adds, by pool size
| Pool volume | 1 gal of liquid chlorine 10 % | 1 gal of liquid chlorine 12.5 % | 1 lb of cal-hypo 65 % | 1 lb of trichlor 90 % |
|---|---|---|---|---|
| 5,000 gal | +20.0 ppm | +25.0 ppm | +15.6 ppm, +11.0 ppm calcium | +21.6 ppm, +13.1 ppm stabilizer |
| 7,500 gal | +13.3 ppm | +16.7 ppm | +10.4 ppm, +7.3 ppm calcium | +14.4 ppm, +8.7 ppm stabilizer |
| 10,000 gal | +10.0 ppm | +12.5 ppm | +7.8 ppm, +5.5 ppm calcium | +10.8 ppm, +6.5 ppm stabilizer |
| 15,000 gal | +6.7 ppm | +8.3 ppm | +5.2 ppm, +3.7 ppm calcium | +7.2 ppm, +4.4 ppm stabilizer |
| 20,000 gal | +5.0 ppm | +6.2 ppm | +3.9 ppm, +2.7 ppm calcium | +5.4 ppm, +3.3 ppm stabilizer |
| 25,000 gal | +4.0 ppm | +5.0 ppm | +3.1 ppm, +2.2 ppm calcium | +4.3 ppm, +2.6 ppm stabilizer |
| 30,000 gal | +3.3 ppm | +4.2 ppm | +2.6 ppm, +1.8 ppm calcium | +3.6 ppm, +2.2 ppm stabilizer |
| 40,000 gal | +2.5 ppm | +3.1 ppm | +1.9 ppm, +1.4 ppm calcium | +2.7 ppm, +1.6 ppm stabilizer |
The same maths run backwards. Stabilizer (CYA) and calcium stay in the water after the chlorine is used up; only replacing water lowers them.
Free chlorine to keep, by stabilizer level (pools without a salt cell)
| CYA (stabilizer) | Minimum FC | Target FC |
|---|---|---|
| 30 ppm | 2 ppm | 4–6 ppm |
| 40 ppm | 3 ppm | 5–7 ppm |
| 50 ppm | 4 ppm | 6–8 ppm |
Source: Trouble Free Pool, "The Free Chlorine and Cyanuric Acid Relationship", liquid chlorine table. Checked 12 November 2026. More stabilizer means more free chlorine is needed. Your local health rules and the product label still apply.
Worked example: 15,000 gallons, free chlorine from 2 to 5 ppm
- Rise needed: 5 − 2 = 3 ppm.
- 10 % liquid chlorine: 12.8 fl oz raises 10,000 gallons by 1 ppm.
- For 15,000 gallons and 3 ppm: 12.8 × 1.5 × 3 = 58 fl oz, about 0.45 gallon.
- The same rise with 65 % cal-hypo: 9.2 oz, which also adds 2.1 ppm of calcium hardness.
Result: about 58 fl oz of 10 % liquid chlorine, added in portions with the pump running.
More pool tools
PoolPro: Chemistry & Route
Turn a pool test into exact doses for the chemicals already on your shelf, in the order to add them. Offline, no account, no ads. See what's inside.
Questions
How much liquid chlorine do I add per 10,000 gallons?
About 12.8 fl oz of 10 % liquid chlorine, or 10.2 fl oz of 12.5 %, for each 1 ppm of free chlorine. A 3 ppm rise takes 38 fl oz of 10 %.
How much liquid chlorine for a 20,000 gallon pool?
25.6 fl oz of 10 % liquid chlorine for each 1 ppm, so 77 fl oz (0.60 gal) for a 3 ppm rise. One gallon of 10 % adds about 5.0 ppm there. Other volumes are in the tables, and each one loads into the calculator.
How much chlorine per gallon of pool water?
Per 1,000 gallons, 1 ppm takes about 1.28 fl oz of 10 % liquid chlorine or 0.21 oz of 65 % cal-hypo. Work from the ppm you need, not from a fixed amount per gallon.
What is the difference between liquid chlorine, cal-hypo and trichlor?
All add free chlorine. Liquid chlorine and bleach add only salt. Cal-hypo also adds calcium: about 7 ppm of hardness for every 10 ppm of chlorine. Trichlor and dichlor also add stabilizer: about 6 and 9 ppm of CYA per 10 ppm of chlorine, which builds up over a season.
How much free chlorine should my pool have?
It depends on the stabilizer (CYA) level: Trouble Free Pool's chart gives a target of 4–6 ppm at 30 ppm CYA and 5–7 ppm at 40 ppm for pools without a salt cell. Test first, then dose the difference.
Can I mix two kinds of chlorine to save time?
No. Never mix pool chemicals, and never put one kind of chlorine into a feeder, bucket or scoop that held another: some combinations react violently. Add each product to the pool water separately.
How long after adding chlorine can you swim?
Follow the product label. As a rule, let the pump circulate the water, test again, and swim only when the free chlorine is back within the range for your pool.